Muros de Bloque MálagaBlock walls, split-face & concrete panels
Long run of concrete panels on a block base
Concrete panels

Precast concrete panel fences (placas de hormigón)

A solid, heavy boundary built from factory-made concrete panels that slide into posts. We set out, pour the post footings and assemble the panels in line.

A precast concrete panel fence is a boundary made of factory-produced reinforced concrete panels, often with a stone or brick pattern, that slot between concrete posts set in footings, sometimes on top of a low block wall.

What is a precast concrete panel fence?

In short: it is a fence of factory-made concrete panels slotted between concrete posts, giving a solid wall-like boundary without block laying.

In Spanish these are usually called placas de hormigón or vallas de hormigón prefabricado. The posts have grooves on their sides; the panels are lowered in from above and stack one on another until the fence reaches its height. Many panels have a moulded pattern – stone, brick or a plain face – on one or both sides.

The panels arrive finished, so there is no render and no block laying for the upper part. The skilled work lies in setting the posts: they have to be exactly in line, at the right spacing for the panels, plumb and firmly bedded in their footings. If one post is out, every panel after it fights the error.

Panels can stand directly on the ground with a base panel, or on a low block wall. We build both, and the second option is shown in the photos on this page.

Fitting precast concrete panels onto a block base
Fitting precast concrete panels onto a block base

Where does a concrete panel fence make sense?

In short: on long boundaries, rear and side lines, rural plots near houses and anywhere a solid screen is needed without the time of a full block wall.

Precast panels are practical where a solid boundary is needed over a long length and the look is less important than privacy and robustness: rear boundaries, side lines between plots, country properties and plots next to tracks or roads.

They are also an option when a full-height block wall is not wanted but a light fence is not enough. With a low block wall underneath, the result is a solid boundary with a masonry base.

They are less suitable where the boundary must match a painted villa exactly, or where an urbanisation requires specific materials on the street front. In those cases a rendered block wall or split-face block is usually the better match.

Stone-pattern concrete panels on a low wall, part-built
Stone-pattern concrete panels on a low wall, part-built

Panels on a low wall, or straight into the ground?

In short: a low block wall underneath gives a stronger base and handles slopes and soil better; post-and-panel straight into the ground is simpler on level, firm ground.

On level, firm ground, concrete posts set in individual footings with a base panel at the bottom can make a complete fence. The panel line follows the ground closely and there is no masonry stage.

Where the ground slopes, where garden soil sits higher on one side, or where you want the boundary to look more like a wall, we build a murete first and set the panel system on it. The wall deals with the ground; the panels deal with height and privacy. Our page on the low wall and pillars explains how that base is built.

Concrete panels are heavy. Moving and placing them needs access, and on tight sites the route for the panels can affect how the job is organised.

Finished stone-pattern concrete panel fence
Finished stone-pattern concrete panel fence

What should be checked before ordering concrete panels?

In short: the boundary line, local rules on solid boundaries, access for heavy panels, the ground under the posts and any level difference across the line.

Because a panel fence is solid, local rules on solid boundaries apply just as they would to a wall. The ayuntamiento and, where relevant, the urbanisation decide what is allowed; see our permits guide.

Panels are not designed to hold back earth. If soil is higher on one side, pressure on the panels and posts can push them out of line. Our guide on garden wall or retaining wall explains why this matters and when a technician is needed.

Finally, plan the access. Panels have to reach the line, and posts need their footings poured accurately. A narrow path or a steep drive can change the method.

How do you maintain a concrete panel fence?

In short: very little: occasional cleaning, checking posts stay in line, and painting only if you choose a painted finish.

Concrete panels need little care. Most owners leave them in their natural colour; some paint them with a masonry paint to match the house, which then needs repainting over time.

Check the posts after very strong winds, and look at the base of the fence where garden soil or irrigation meets it. If a panel is cracked or chipped, it can often be lifted out and replaced without taking down the fence, provided the posts are still sound.

Any lean in the fence line is worth investigating early. Our cracks guide covers what movement in boundary walls usually means.

What affects the price of a precast panel fence?

In short: length, height in panels, panel pattern, whether there is a block wall underneath, the post footings, ground, slope and access for heavy materials.

The cost factors listed on this page are the lines you will find in our quote. Access plays a bigger role with panels than with block, because of their weight and size. A block base adds a stage but can save trouble on uneven ground.

For general guidance on fence quotes see fence and wall quotes. To compare panels with other wall types, read split-face, render or concrete panels.

BR
Bauman Raymond Attila
Author and person responsible · Last reviewed:
How we build it – step by step

How we build it – step by step

  1. Survey

    We check the line, the ground, any slope and the access route for the panels.

  2. Setting out

    We mark the post positions to the exact panel module and agree the line with you.

  3. Footings

    We excavate and pour footings for each post, or a continuous footing if there will be a block base.

  4. Block base (if chosen)

    We build the low block wall that will carry the panel system.

  5. Setting the posts

    We set the posts plumb and in line, bedded firmly in their footings.

  6. Placing the panels

    We slide the panels into the post grooves, checking level as we go.

  7. Finishing

    We fit caps, fill and clean where needed, and paint if agreed.

  8. Clean-up and handover

    We clear the site and review the finished fence with you or by photos.

When is it the right choice – and when not?

When is it the right choice – and when not?

A good fit if…

  • Long side and rear boundaries
  • Rural plots near houses
  • Owners who want a solid screen without a full block wall
  • Plots where a block base can deal with uneven ground

Consider another option if…

  • Holding back soil
  • Street fronts in urbanisations that require rendered walls
  • Sites with no access for heavy panels
  • Owners who want a very refined architectural finish
What affects the cost?

What affects the cost?

We don't publish fixed prices: every fence is quoted line by line using these factors.

  • Length in linear metres
  • Height (number of panels)
  • Panel pattern and finish
  • Block base or posts only
  • Post footings and ground conditions
  • Slope along the line
  • Access for heavy materials
  • Painting or natural finish
  • Removal of an old fence

Fence cost calculator See how a fence quote is put together

Itemised quoteItemisedquoteLinear metresHeightPanel typeLow wall or notFoundationsGround & slopeAccessOld fence removalClearingPermit
Our specialist sites by fence type
FAQ

Frequently asked questions

Are concrete panels a wall or a fence?

They behave like a solid wall visually, but structurally they are a post-and-panel fence. Local rules on solid boundaries usually apply to them.

Can concrete panels be painted?

Yes, with a suitable masonry paint. Once painted, they will need repainting over time like any painted wall.

Can one panel be replaced if it breaks?

Usually, yes. Panels can be lifted out of the post grooves and replaced, as long as the posts are sound.

Do the panels need a block wall underneath?

Not always. On level, firm ground posts and panels can go straight into the ground. A block base helps on slopes and uneven ground.

Will a concrete panel fence hold back soil?

No. Panels are not designed to retain earth. If there is a level difference, a technician should assess the situation first.

Which pattern should I choose?

That is a matter of taste and of what the urbanisation allows. We show you what suppliers offer at the time of the job.

Do you need machinery for the panels?

It depends on the size of the panels and the access. We assess this during the survey.

Can I combine panels with other fence types?

Yes. A common mix is concrete panels on the side and rear and a rendered or split-face wall on the street front.

Do I need a permit for a panel fence?

It is usually treated like other boundary works and needs municipal permission in some form. Check with your ayuntamiento.

Can you quote remotely?

Yes. Send photos and the approximate length and we can make a first assessment, confirmed on site before work starts.

Get a quote

Planning a block wall? Send us photos

Send photos and the approximate length of your boundary. We reply with questions or a first itemised assessment, without commitment.