
Common mistakes when choosing a block boundary wall
Most problems with block walls are decided before the first block is laid. These are the choices we see go wrong most often, and how to get them right.
Mistake: choosing the design before checking the rules
In short: check the town's and the urbanisation's rules before falling for a design, or you may have to change it later.
Owners often pick a wall from a photo and only then ask the town hall. If the town limits the height of solid walls, or the urbanisation requires a particular colour or an open upper part, the design has to change – sometimes after materials are ordered.
Start with the rules. Our permits guide explains what to ask the ayuntamiento. Then choose between a solid wall and a low wall with a fence on top within those limits.
Mistake: assuming you know where the boundary is
In short: confirm the line with the deeds and, if needed, a surveyor; agree with the neighbour before building on or near it.
Old fences, hedges and walls are not always on the legal boundary. Building on an assumed line can lead to disputes that are expensive to resolve once the wall is up.
Check the deeds and the cadastral plan, and if there is any doubt, ask a surveyor (topógrafo). If the wall will go on the shared line, read our party wall page and agree with the neighbour in writing.
Mistake: putting a heavy wall on a light base
In short: an old footing built for a mesh fence will not carry a solid wall or a tall closed infill; check it or replace it.
It is tempting to save on groundwork by reusing the base of an old fence. Those bases were usually designed for a light load. A block wall or a closed screen on top puts much more weight and wind load on them, and the result often shows as cracks within a short time.
Our foundations guide explains what a footing must do. If the old base cannot be confirmed as adequate, budget for a new one.
Mistake: letting a boundary wall hold back soil
In short: a wall with soil higher on one side is a retaining wall, which needs a technician; do not let a garden wall become one by accident.
On terraced plots, owners sometimes plan to fill the garden up to the top of a new boundary wall. That turns the wall into a retaining wall, which it was not designed to be.
If the ground on one side will be higher, involve a technician first. Our guide on garden wall or retaining wall explains the difference.
Mistake: choosing a finish that does not suit how you live
In short: if you will not be there to repaint, a painted wall may not be the best choice; if colour matching matters, split-face may be too limiting.
A white rendered wall looks great when freshly painted, but it needs repainting, and marks show at the base. If you live abroad most of the year, a split-face block wall may suit you better. On the other hand, if your urbanisation requires a particular colour, render is easier to match.
Think about maintenance before appearance alone. Our render and finishes guide compares the options.
Mistake: a fully closed infill on an exposed plot
In short: a closed screen catches wind; on hillsides and near the sea, design pillars and footings for it or choose a more open infill.
Fully closed slats or boards give maximum privacy, but they act like a sail. On exposed plots, that load goes into the pillars and footing. If they were designed for an open fence, problems follow.
Tell your contractor what infill you want before the base is built, and ask how the pillars are designed for it. Our post on what can go wrong during the build covers related issues.
Articles and guides

What can go wrong while a block wall is being built
Even a well-planned wall meets surprises once the digging starts. Here is what can happen during the build, and how a careful contractor handles it.
View details →
Low block wall with a fence on top – one job, one contractor
Privacy above, a solid base below. We build the block wall and pillars and fit the infill, so there is one person responsible for the whole boundary.
View details →Permits for block boundary walls in Málaga province
Before a block wall goes up, someone has to confirm it is allowed. This guide explains the routes under Andalusian planning law and the questions to ask locally.
View details →
Block wall foundations: what holds a boundary wall up
Most problems in boundary walls start below ground. This guide explains, without jargon, what a footing does and what a contractor should check before pouring one.
View details →Frequently asked questions
What is the most common mistake with block walls?
Reusing an inadequate footing or loading a wall with more than it was designed for.
Should I check rules before choosing a design?
Yes. Rules on height and solid sections can change the design entirely.
How do I confirm my boundary?
Check the deeds and cadastral plan; if in doubt, ask a surveyor.
Can I build on my old fence base?
Only if it is confirmed as adequate for the new wall. Many are not.
Is it a mistake to choose a white wall?
Not at all, but it needs repainting. If you are often away, consider split-face.
Why does the infill choice matter for the wall?
Because the infill decides the wind load on the pillars and footing.
Can I fill my garden up against a new wall?
Not unless a technician has designed it as a retaining wall.
Should I talk to my neighbour first?
Yes, especially if the wall is on or near the shared line.
Is the cheapest quote a mistake?
Not necessarily, but compare line by line. Missing lines often reappear later.
Can these mistakes be fixed later?
Some can, at a cost. Many are much cheaper to avoid at the planning stage.
Planning a block wall? Send us photos
Send photos and the approximate length of your boundary. We reply with questions or a first itemised assessment, without commitment.